| |
- Body, external
housing, wash tank, and all chassis components in brushed stainless
steel AISI 304 18/8
- Model
767 is built with twin three-phase wash motor pumps of 2HP each
(total of 4HP) for greater power and enhanced performance
- Insulated
lower cabinet provides for a quieter operation
- A
rinse booster pump is incorporated; always ensuring the operator
of an optimal water presure for the best rinsing results
- Automatic
adjustable detergent and rinse-additive pumps are provided as
standard equipment
- Manual
wash selector switch provides variable cycle times of 2, 4 or
6 minute periods for heavier soiled applications - capacities
of between 10 and 30 racks per hour
- Large
capacity opening permits the washing of sheet pans and mixing
bowls of up to 27.5" high by 23" wide
- Door-activated
automatic start and stop mechanism for ease and convenience
- Model
767 is designed to be installed either in a corner or straight
pass-thru set-up
|
|
 |
- Body,
external housing, wash tank, and all chassis components in brushed
stainless steel AISI 304 18/8
- Reduced
operating noise of 58 DbA due to utilization of double-wall insulated
side & top panels; which remove easily for any technical service
- Upper
and lower wash and rinse jets on revolving arms constructed of
fiberglass; easy to remove and clean without the need for tools
- Safety
micro-switch on the door to interrupt the wash pump action
- Individual
and adjustable variable speed peristaltic pumps for: detergent,
sanitizer and rinse-additive
- Possibility
of built-in or free standing installation
- Wash
tank protected with double filters
- Door
opening with overall clearance of 14.25”
- Automatic
fill and water level regulation of tank
- Slide-out
front control panel provides easy access for technical service
- Rack
capacity: 19.75" x 19.75" (50 cm x 50 cm)
|
|
|
- Complete
cycle: 150 seconds (130 second wash, 5 second dwell & 15 second
rinse)
-
Wash tank capacity: 3.17 US gallon (12 liters)
- Wash
temperature: 140F recommended, supply dependant (no heaters)
- Power
supply: 110 volts, 60Hz, 8 Amps
- Motor
pump: 0.75 H.P. With Clipson at 320F
- Maximum
power rating: 600 Watts
- Water
consumption per cycle: 2.0 U.S. Gallons (7.5 liters)
- Working
pressure: 25 P.S.I. (dynamic)
- Water
inlet connection: ¾" NPT male
- Shipping
weight: 145 lbs. (65 Kg)
- Drain
connection: 1” I.D. hose connection (hose not included)
- OPTION:
Installation kit “D” (recommended)
|
|
|
