Washes racks and carts up to 36"W x 72"D x 78"H. The walk-in design when utilizing the appropriate loading racks can also be used as a pot and pan washer. The standard model is built with one door. Optional second door can be supplied for pass-thru operation.

• #16 gauge polished 304 stainless steel housing with #12 gauge 2B finish 304 stainless steel tank
• 10 HP wash pump deliver 300 gal. of wash solution at 40 psig. This water, through nozles on both rotating side wash arms, is blasted onto the soiled rack and wares
• All wash piping and nozzles are stiainless steel
• All rinse piping and nozzles are brass
• Brass steam injector, with temperature control valve for tank heat
• 2-1/2" diameter gauges for easy readability
• Stainless steel control panel enclosure
• 16" diameter vent opening
• NOTE: The machine will be shipped knocked down (to be assembled at site by the customer)
  

• Fresh (rinse) water: 20 gpm @ 22 psig and 180-185F at the machine
  Steam tank heat: 350 lb./hr @ 12-15psig
• Electrical
  - 208v-3ph-60hz, 8kw, 36 amp
  - 230v-3ph-60hz, 8kw, 32 amp
  - 460v-3ph-60hz, 8kw, 16 amp
  

• Second door for pass-thru operation
• Stainless steel temp-coils and steam trap for the tank heat
  Powered vent fan
• Rinse water temperature booster;
  steam heated or electric
• Steam booster requirements
  - Fresh (rinse) water: 20 gpm @42" diameter x 28"H internal work area
  - Steam flow rate for 120F water: 650 lb./hr
  @ 12-15 psig (Actual consumption: 100 lb./hr)
  - Steam flow rate for 140F water: 450 lb./hr
  @ 12-15 psig (Actual consumption: 70 lb./hr)
• Racks:
  - Custom racks per customer's requirement