| |
- 10
HP wash pump to deliver 280 gpm and 40 psi
- Wash
and rinse pressure and tempurature gauges
- Steam
injector tank heat
- Steam
pressure gauge and shut-off valve for tank heat
- Vacuum
breaker and strainer for rinse water
- Tank
drain and overflow
- Machine
pre-wired and tested
- Single
point electrical connection
|
|
 |
- Pass-thru
corner design
- Wrap
around door with a 47"W. opening
- #14
gauge stainless steel construction
- Stainless
steel control panel enclosure
- Adjustable
stainless steel sanitary legs
- Removable
scrap trays
- Stainless
steel machine base
- Stainless
steel door-cable pulley supports
- 42"
diameter roto-table
- Stainless
steel wash piping and nozzles
- Stainless
steel internal rinse piping with brass nozzles
- 12"
diameter vent opening
|
|
|
- 18
batches per hour
- 63
gallon (U.S) wash tank
- 42"
diameter x 28"H internal work area
|
|
|
|
|
- Automatic
wash water (tank) temperature control
- Complete
automatic wash, drain and rinse cycles
- Adjustable
wash, drain and rinse cycles
- "Push-stop"
button for emergency shut down
- Capability
of continuous (manual) wash or rinse cycle
|
|
|
- Hot
water: 14 gpm @ 20 psi /
- Consumption:
108 gph
- Tank
heat steam: 80 lb./hr @ 15 psi
- Electrical:
460v-3ph-60hz, 8kw, 16amp
230v-3ph-60hz, 8kw, 32amp
208v-3ph-60hz, 8kw, 36amp
|
|
|
- Steam
coil tank heat
Powered vent fan
- Electric
tank heat (user to provide a separate fused disconnect)
- Rinse
water temperature booster; steam heated or electric to raise
incoming rinse water temperature from 120F or 140F to 180F
- Racks:
- General utility basket
- Utensil basket
- Sheet pan rack
- 40" diameter rack
- Cover for 40" rack
- Assorted pan rack
|
|
|
