| |
- 5
HP wash pump to deliver 90 gpm and 40 psi
- Top
and bottom rotating stainless steel wash and rinse arms
- Wash
and rinse pressure and tempurature gauges
- Steam
injector tank heat Steam pressure gauge and shut-off valve for
tank heat
- Vacuum
breaker and strainer for rinse water
- Tank
drain and overflow
- Machine
pre-wired and tested
- Single
point electrical connection
|
|
 |
- Front
load design
- #14
gauge stainless steel construction
- Stainless
steel control panel enclosure
- Adjustable
stainless steel sanitary legs
- Removable
scrap trays
- Stainless
steel machine base
- Stainless
steel door-cable pulley supports
- Stainless
steel wash piping and nozzles
- Stainless
steel internal rinse piping with brass nozzles
|
|
|
- 19
batches per hour
- 37
gallon (U.S) wash tank
- 28"W
x 28"D x 28"H internal work area
|
|
|
|
-
Automatic
wash water (tank) temperature control
-
Complete
automatic wash, drain and rinse cycles
-
Adjustable
wash, drain and rinse cycles
-
"Push-stop"
button for emergency shut down
-
Capability
of continuous (manual) wash or rinse cycle
|
|
|
- Hot
water: 13 gpm @ 20 psi /
- Consumption:
82 gph
- Tank
heat steam: 60 lb./hr @ 15 psi
- Electrical:
460v-3ph-60hz, 4kw, 7amp
230v-3ph-60hz, 4kw, 13amp
208v-3ph-60hz, 4kw, 15amp
|
|
|
- Steam
coil tank heat
- Powered
vent fan
- Electric
tank heat (user to provide a separate fused disconnect)
- Rinse
water temperature booster; steam heated or electric to raise
incoming rinse water temperature from 120F or 140F to 180F
- Racks:
- General utility basket
- Utensil basket
- Sheet pan rack
- Hold-down covers
- Counter pan rack
|
|
|
